CrownCoat brushable sealant is a fast setting elastomeric coating that forms a flexible waterproof membrane. It's specifically formulated to repair and protect chimney crowns from water intrusion and is easy to apply with a 3" or 4" paint brush.

Because of its unique “quick drying” water base technology and its easy brush on application, CrownCoat has become a favorite among chimney professionals. Like CrownSeal, CrownCoat is premixed and can be used wherever a long lasting waterproof membrane is needed.

CrownCoat is durable and requires no mixing or special bonding agents. The compounds in Crown Coat are solvent free and will not harm the environment. Use Crowncoat for your do it yourself brick chimney repair projects. Fix and repair chimney crowns with the same product the pros use.

• Note: Surface and air temperature should be a minimum of 45°F at the time of application. Do not apply if temperature is expected to drop below 45°F within a 4 hour period. Do not apply to frozen or frost covered surfaces.
• Application must be to a clean, dry surface. Do not apply to wet or water saturated surfaces and/or when rainfall is expected within four hours unless adequate protection with a polyethylene film or its equivalent is provided. Store unused product above 32° to prevent freezing.

Coverage: 40 sq. ft. per gallon (80 square feet for a 2 gallon container)
Available Sizes: 2 & 5 gallon containers
Application Temperatures: Minimum 45° F
Application Method: 3" - 4" Paint Brush
Dry Time: 30 - 60 minutes (allow 2 - 4 hours before rainfall)
Cleanup: Remove excess CrownCoat with a stiff nylon scrub brush and water